The crystal structure of Fe(SeO2OH)(SeO4)·H2O

Summary The crystal structure of the hydrothermally synthesized compound Fe(SeO₂OH) (SeO₄) · H₂O was determined by single crystal diffraction methods:a=8.355(2) Å,b=8.696(2) Å,c=9.255(2) Å, =93.72(1)°,V=670.95 ų;Z=4, space group P2₁/c,R=0.029,R _w=0.027 for 2430 independent reflections (sin /0.76 Å^–1). Isolated FeO₅(H₂O)-octahedra share five corners with [SeO₂OH] and [SeO₄] groups to form sheets parallel to (100). These sheets are interconnected via hydrogen bonds only.

---

Die Kristallstruktur von Fe(SeO₂OH)(SeO₄)·H₂O

Zusammenfassung Die Kristallstruktur der hydrothermal dargestellten Verbindung Fe(SeO₂OH) (SeO₄)·H₂O wurde mittels Einkristallbeugungsmethoden bestimmt:a=8.355(2) Å,b=8.696(2) Å,c=9.255(2) Å, =93.72(1)°,V=670.95 ų;Z=4, Raumgruppe P2₁/c,R=0.029,R _w=0.027 für 2 430 unabhängige Reflexe (sin / 0.76 Å^–1). Isolierte FeO₅(H₂O)-Oktaeder teilen fünf Ecken mit [SeO₂OH]- und [SeO₄]-Gruppen, wobei sie Schichten parallel (100) bilden. Diese Schichten sind nur über Wasserstoffbrücken miteinander verbunden.

     

Fe3O4磁性纳米粒子的超声包金及其表征

超声条件下, 在乙醇分散的3-氨丙基三乙氧基硅烷(APTES)功能化的磁性Fe₃O₄纳米粒子和四氯合金酸的混合溶液中滴加柠檬酸钠, 成功地制备了磁性Fe₃O₄/Au复合纳米粒子. 采用X射线粉末衍射仪(XRD)、紫外吸收可见光谱(UV-Vis)、带有电子能谱仪(EDS)的扫描电子显微镜(SEM)、透射电子显微镜(TEM)、光电子能谱(XPS)、超导量子干涉仪(SQUID)等方法, 对复合粒子的形态、结构、组成以及磁学性质进行了表征. 结果表明: 在此条件下制得的复合粒子粒径在30 nm左右, 室温下磁化强度可达63 emu/g.     

Survey of ligand field parameters of strong field d complexes obtained from the g matrix

Using a newly proposed approach involving an internally consistent set of equations, the ligand field parameters Δ/ξ, V/ξ and k are obtained from literature values of the g matrix for strong field d⁵ systems of various conformations in which |Δ/ξ|≤10. Qualitative analysis of the observed results is done using the Angular Overlap Model, AOM.     

新型中温固体氧化物燃料电池阴极材料Fe掺杂Sm0.5Sr0.5CoO3性能研究

本文系统研究了新型中温固体氧化物燃料电池(IT-SOFC)阴极材料Sm_0.5Sr_0.5Co_1-xFe_xO_3－δ(SSCF)的晶体结构、热膨胀系数、导电率及电化学性能。固相合成的Sm_0.5Sr_0.5Co_1-xFe_xO_3－δ化合物均为单相材料，随着掺Fe量的不同，SSCF的晶体结构发生变化，在0≤x≤0.4时，SSCF为正交晶系钙钛矿结构，在0.5≤x≤0.9时，SSCF为立方晶系钙钛矿结构。Fe掺杂可以显著的改善Sm_0.5Sr_0.5CoO₃的热膨胀系数，随着Fe含量的增加，热膨胀系数减小。在800℃下，SSCF导电率均大于100 S·cm^-1。随着Fe含量的增加，极化电阻增大；含量x=0.4时，极化电阻达到最大值；之后，随Fe含量的增加，极化电阻减小，在700～800 ℃时，Sm_0.5Sr_0.5Co_0.2Fe_0.8O_3－δ表现出了良好的氧催化活性。     

Comparative evaluation of Fe(III) reducing power-based antioxidant capacity assays in the presence of phenanthroline, batho-phenanthroline, tripyridyltriazine (FRAP), and ferricyanide reagents

The chemical diversity of antioxidants in complex matrices such as plant extracts makes it difficult to separate and quantify antioxidants from these solutions. Therefore it is desirable to establish methods that can measure the total antioxidant capacity (TAC) levels directly from plant extracts. Iron(III)-based TAC assays, especially the most widely used FRAP (ferric-reducing antioxidant power), play an important role in this regard. However, many problems have been reported in the application of the FRAP assay, the most serious one being the incomplete oxidation of a number of antioxidants during the time protocol of the assay. Thus, six different ferric ion-based total antioxidant capacity (TAC) assays have been comparatively tested, modified, and improved so as to obtain more sensitive and precise results for complex mixtures, namely: 1,10-phenanthroline (o-phen) method (with incubation), batho-phenanthroline method (with incubation), original FRAP method, modified FRAP method (with incubation), original ferricyanide method, and modified ferricyanide method (with incubation). Two new assays in this regard (i.e., o-phen and batho-phen) have been established, and the existing assays (FRAP and ferricyanide) have been modified so as to let the oxidation reactions of antioxidants reach completion. The molar absorptivity for a variety of antioxidants was highest for modified FRAP, batho-phen, and original FRAP methods. The absorption maximum wavelength shifted batochromically to a higher extent for modified ferricyanide, FRAP, and batho-phen procedures, decreasing the possibility of interferences due to organics absorbing in the near-UV range of the visible spectrum where most antioxidant assays are performed. The linear concentration ranges were shown to be further extended and linear correlation coefficients improved with respect to the most widely used ferric-based assay, FRAP. Of the six assays tested and developed, only the modified ferricyanide procedure gave high intercept values and low addivitity of TAC values of constituents in complex mixtures, requiring further attention of method optimization. Thus, it was shown that the most widely used FRAP could be effectively modified, and o-phen, batho-phen, and ferricyanide methods constitute cheaper alternatives to FRAP under certain conditions, with partly improved molar absorptivity (and thus sensitivity) for antioxidants, lower intercept values (and higher precision), broader linear range (and higher flexibility), and better additivity of TAC values of antioxidant constituents in mixtures.     

Electronic state of Fe used as Mössbauer probe in the perovskites LaMO3 (M=Ni and Cu)

For the first time a comparative study of rhombohedral LaNiO₃ and LaCuO₃ oxides, using ⁵⁷Fe Mössbauer probe spectroscopy (1% atomic rate), has been carried out. In spite of the fact that both oxides are characterized by similar crystal structure and metallic properties, the behavior of ⁵⁷Fe probe atoms in such lattices appears essentially different. In the case of LaNi_0.99Fe_0.01O₃, the observed isomer shift (δ) value corresponds to Fe³⁺ (3d⁵) cations in high-spin state located in an oxygen octahedral surrounding. In contrast, for the LaCu_0.99Fe_0.01O₃, the obtained δ value is comparable to that characterizing the formally tetravalent high-spin Fe⁴⁺(3d⁴) cations in octahedral coordination within Fe(IV) perovskite-like ferrates. To explain such a difference, an approach based on the qualitative energy diagrams analysis and the calculations within the cluster configuration interaction method have been developed. It was shown that in the case of LaNi_0.99Fe_0.01O₃, electronic state of nickel is dominated by the d⁷ configuration corresponding to the formal ionic “Ni³⁺-O²⁻” state. On the other hand, in the case of LaCu_0.99Fe_0.01O₃ a large amount of charge is transferred via Cu-O bonds from the O:2p bands to the Cu:3d orbitals and the ground state is dominated by the d⁹L configuration (“Cu²⁺−O” state). The dominant d⁹L ground state for the (CuO₆) sublattice induces in the environment of the ⁵⁷Fe probe cations a charge transfer Fe³⁺+O⁻(L)→Fe⁴⁺+O²⁻, which transforms “Fe³⁺” into “Fe⁴⁺” state. The analysis of the isomer shift value for the formally “Fe⁴⁺” ions in perovskite-like oxides clearly proved a drastic influence of the 4s iron orbitals population on the Fe−O bonds character.     

M?ssbauer and other spectral studies of Fe(III) complexes of benzothiazolines

Different molar reactions of Fe(OPr¹)₃, and FeCl₃ with benzothiazolines having an NSH donor system. derived by the condensation ofo-aminothiophenol with heterocyclic aldehydes. viz. pyridine-2-aldehyde. furfuraldehyde and thiophene-2-aldehyde. lead to the formation of [Fe.Pr¹(NS)₂]₂, [Fc(NS)₃] and [Fe(NS)₂Cl| type of complexes. The resulting derivatives have been characterized by elemental analysis, conductivity measurements, molecular weight determinations and magnetic studies. IR, electronic, M?ssbauer and ESR spectral data have been used to deduce the structures of the resulting derivatives.     

DeNOx催化剂FeZSM-5/Raney Fe的制备

用原位晶化法合成了FeZSM-5/RFe(RFeRaney Fe)催化剂. 合成液的组成为5Na2O*100SiO2*10TPABr*7 000H2O,pH＞11.5. 合成液中不含Al,ZSM-5分子筛的骨架Al只来源于Raney Fe的表面. 此法提高了ZSM-5分子筛中骨架Al的稳定性和分子筛上Fe离子的负载量. FeZSM-5/RFe用作DeNOx催化剂时具有较高的活性和水热稳定性.     

Fe3+-TiO2/SiO2光催化降解罗丹明B的研究

以硅胶为载体,采用溶胶-凝胶法制备了不同掺杂量的Fe3+-TiO2/SiO2光催化剂,并采用SEM,Raman和DRS等手段对其进行了分析和表征.以氙灯为光源,通过对可溶性染料罗丹明B的降解反应,考察了Fe3+-TiO2/SiO2催化剂的光催化活性,探讨了光催化反应中溶液pH值和起始浓度对催化反应的影响.     

延边地区65～108岁健康老人头发中锌、铜、铁、锰、镁的含量

用原子吸收光谱法测定延边地区317名65～108岁老人头发中锌、铜、铁、锰、镁含量，观察不同民族、性别、年龄老人这些元素的差异。结果表明：1.朝鲜旗发锌低于汉族，满族发铜低于汉族、朝鲜族，汉族发镁高于朝鲜族、满族，发铁、发锰在汉、朝、满民族之间无区别。2．汉族、朝鲜族男发锌高于女性，汉族女性发铜高于男性，发铁、发锰、发镁在性别之间无区别。3、90岁组朝鲜族发锰、发镁低于65岁、76岁组，朝鲜族发锌、发铜、发铁在65～108岁之间无统计学意义。